Conveyors and material handling systems
Conveyors, transfer sections, supports and handling assemblies for moving bulk materials, parts or production flow.
Industrial subcontracting · Estonia
Welded steel components and assemblies for Nordic manufacturers
PnP Grupp turns industrial fabrication projects into prototypes, finished components and repeat production.
No production drawings yet? Send sketches, photos, samples or a short project description.
Your situation
When production needs extra capacity, every delayed component slows the whole project
Whether your workshop is overloaded, a supplier cannot keep up, or a new component needs a dependable production route, outsourced fabrication should not create more problems than it solves.
- Your team has drawings, but no free production capacity.
- Your current supplier is too slow, too expensive or too limited.
- You need a prototype before ordering a batch.
- You have a sketch, sample or idea, but no production drawings yet.
- You want one partner for fabrication, machining, welding and assembly.
How a project moves forward
1
Drawings / sketch / sample Start with the information you already have.
2
Engineering review Check feasibility, missing details and production route.
3
Prototype Test first parts before committing to repeat orders.
4
Repeat production Move forward with approved requirements.
What we produce
What you can outsource to PnP Grupp
Industrial metal fabrication projects — components, assemblies and production work for companies, not private consumer metalwork.
Hoppers, bunkers and ducts
Hoppers, bunkers, chutes and duct assemblies for storage, transfer, ventilation and process lines.
Forestry and agricultural equipment parts
Welded and machined parts for agricultural trailers, forestry equipment, buckets, crushers, log trailers and heavy-duty machinery.
Marine and shipbuilding components
Marine-grade steel components for shipbuilding, heavy ventilation, onboard systems and auxiliary equipment.
Heavy machinery parts and assemblies
Welded and machined assemblies for heavy machinery, made to drawings and repeatable production requirements.
Gas ducts
Steel ductwork for gas handling systems, including sections, supports, transitions and custom assemblies.
Service platforms and access structures
Steel platforms and access assemblies designed for maintenance, inspection and equipment operation.
Custom welded and machined components
Welded and machined components for equipment manufacturers, subcontracted from prototype to repeat production.
How production can start
Start with one part, then scale when the design is ready
PnP Grupp can support the project before it becomes a repeat order. Use prototypes, one-off parts or small batches to confirm the production route first.
Risk management
Built to reduce the typical risks of outsourced metal fabrication
Outsourcing production only works when the subcontractor understands the project, communicates clearly and can support the next step.
“I am not sure you will understand my project.”
Our team has 27 years of experience in subcontract manufacturing across very different industrial products, backed by an engineering team that reviews drawings, sketches and samples before production. An RFQ is not binding: after the first contact, you will see whether we understand your project, and if not, you can simply stop the discussion.
“We need to test before ordering a batch.”
Start with one or two test parts — no commitment to a series. After your approval, the drawings, materials and welding procedures are locked for repeat production, so piece #40 matches piece #1.
“I am not sure you can produce parts of my size.”
With 13,300 m² of production area across two sites, PnP Grupp is set up for both precise components and large industrial assemblies. Send the dimensions, drawings or photos first, and we will confirm what is realistic before you commit to anything.
“Production abroad will be hard to control.”
You always know where your project stands: one responsible contact in English, updates at agreed milestones, and factory acceptance testing when you need it. Payment can also be tied to agreed milestones, so progress and financial commitment move together. Get a live video walkthrough or visit the site any time — we are a 3–4 hour flight from anywhere in the EU.
“The part needs more than welding.”
Send the drawing, receive the component ready for your assembly: cut, machined, welded, surface-treated and tested — without you coordinating a single extra supplier.
“The RFQ will turn into endless back-and-forth.”
Fill in the form and receive a preliminary quote. Then one call to go through the details — and everything agreed is fixed in writing, so there are no misreadings later. Fast, simple, no endless email threads.
Production examples
Just a few examples of fabrication projects completed by us
Facilities & capacity
Capacity for precise components and large industrial assemblies
PnP Grupp operates across two production sites in Estonia with engineering, fabrication, welding, machining, assembly and FAT capabilities.
13,300 m² total production area
27 years in industrial metal fabrication
18 production processes in one place
from 1 pc prototypes and one-off parts welcome
Inspection and FAT
Dimensional checks and factory acceptance testing available on request, documented and agreed with you when your project requires it.
Engineering team
Support for drawings, technical review, prototypes and design adjustments.
Prototype to repeat production
Start with one-off parts or small batches, then move to repeatable production.
Materials
Carbon steel, galvanized steel, stainless steel, duplex, aluminium, Hardox, Strenx and selected machining materials.
Detailed production capabilities
Sheet metal processing
Plasma cutting with 6000×2000 mm table, gas cutting up to 300 mm, guillotine cutting, CNC bending up to 600 t, plate rolling, drilling and threading.
Profile processing
Semi-automatic band saw cutting, section up to 380×380 mm, length up to 12,000 mm, cutting angle from −60° to +60°.
Machining
Milling, hole boring up to 100 mm diameter, turning up to 1200 mm length and selected materials including steel, aluminium, brass, copper, bronze and plastics.
Welding
TIG, MIG/MAG, structural steel and manual arc welding for carbon steel, stainless steel, Hardox, Strenx and other alloy steels.
Surface treatment and finishing
Shot blasting, liquid painting chambers, stainless steel pickling and passivation, plus partner-supported powder coating, heat-resistant painting and galvanization.
Estonia → the Nordics
Why Nordic companies use Estonian subcontracting partners
Extra capacity without expanding your workshop
Use external fabrication capacity when internal production is overloaded or not set up for a specific component.
Cost-efficient EU production
Estonia offers a practical balance of industrial capability, EU-based production and competitive subcontracting costs.
Flexible project sizes
Start with prototypes, one-off parts or small batches before moving to repeat production.
Engineering support before production
If drawings are missing or incomplete, the engineering team can help prepare the project for manufacturing.
One responsible production partner
Keep the project under one subcontracting workflow instead of coordinating multiple small suppliers.
Practical logistics to the Nordics
Production in Estonia supports deliveries to Finland, Sweden, Norway and other European markets.
EU-based production with practical delivery routes to Finland, Sweden, Norway and the rest of Europe.
Who we serve
A good fit for industrial subcontracting, not private metalwork
PnP Grupp is a good fit for
- Industrial components and assemblies
- Machine-building parts
- Welded steel components
- Hoppers, ducts, frames and platforms
- Prototypes, small batches and repeat production
- Projects based on drawings, sketches, samples or requirements
Usually not the right fit for
- Private fences
- Staircases for private houses
- Gates
- Small repair jobs
- Consumer one-off metalwork
- Building construction projects
Clients
Trusted by industrial customers across the Nordics and Europe
PnP Grupp has worked with industrial customers in Estonia and export markets, including Nordic countries.
Start your project
Send us your drawings, sketches or project details
Already have drawings? Upload them. Still at sketch, sample or idea stage? Describe what you need and we will review the next production step.
- Accepted files: PDF, DWG, DXF, STEP, ZIP, JPG, PNG, DOC, DOCX, XLS, XLSX
- For larger files, share a download link in the message
- Drawings and project details are treated as confidential
FAQ
Frequently asked questions
Can you work without production drawings?
Yes. If you only have sketches, photos, a sample part or a general technical idea, the engineering team can help prepare production drawings before manufacturing.
Can you produce only one or two parts?
Yes. PnP Grupp can support prototypes, one-off parts and small batches. If the design works, the project can move to repeat production.
What materials do you work with?
Carbon steel, galvanized steel, stainless steel, duplex, aluminium, Hardox, Strenx and selected machining materials such as brass, copper, bronze and plastics.
What file formats can I send?
PDF, DWG, DXF, STEP, ZIP, JPG, PNG, DOC, DOCX, XLS and XLSX files are suitable for the first project review.
Do you work with companies in Finland, Sweden and Norway?
Yes. PnP Grupp works with industrial customers across the Nordics and Europe.
Do you take private metalwork projects?
No. The focus is industrial subcontracting, not private fences, gates, staircases, small repairs or consumer one-off metalwork.